MDPE PIPE FITTINGS

We provide a full range of compression fittings for MDPE pipe from Ø20mm to Ø110mm.

The BP Premium range of compression fittings are designed, manufactured and tested under a stringent ISO 9001:2000 quality control system to meet the requirements of ISO 14236. This incorporates the previous CEN & ISO standards and sets test requirements that ensure an estimated working life of 50 years is achieved.

These fittings are a competitive alternative to brands such as Philmac, Plasson and Polyfast.

Design features:-

Captive grip ring and pressing ring

True compression fitting with pressing ring

Grip ring designed to firmly grip and be retained inside nut

Fluted grip ring for push fit application

Reinforced nut with extended ribbing and banding providing increased robustness.

Long thread length

We also offer a wide range of MDPE Pipe to compliment these quality fittings.

Our range of MDPE fittings includes; straight couplers, male adaptors & brass bib taps in various sizes. All our fittings are available for UK delivery today! If you need help with your order then please call our UK-based helpline on 01255 258525

 

Read More

4 products

How do you connect MDPE pipes?

Connecting MDPE pipes involves using compression fittings, which consist of a nut, an O-ring, and a compression ring. First, cut the pipe to the desired length and ensure that the ends are clean and free of debris. Then, slide the nut and O-ring onto the pipe, followed by the compression ring. Insert the pipe into the fitting and tighten the nut until it is snug. Repeat the process for the other end of the pipe, and ensure that the joint is leak-free before using the pipe.

How do you connect blue plastic pipes?

To connect blue plastic pipes, you will need to use PVC cement and primer. First, clean the ends of the pipes with a PVC cleaner. Then, apply the primer to the ends of the pipes and let it dry. Finally, apply the PVC cement to the ends of the pipes and push them together firmly. Hold the pipes together for a few seconds to allow the cement to set.

Can MDPE gas pipe be used above ground?

Yes, MDPE gas pipes can be used above ground. However, it is important to ensure that the pipe is properly protected from UV rays and other environmental factors that can cause damage or deterioration. It is recommended to use a protective sleeve or paint to protect the pipe.

Can you use plastic pipe without inserts?

It depends on the type of plastic pipe you are using and the application. Some plastic pipes, such as PEX, do not require inserts for certain fittings, while others, such as PVC, typically require inserts to ensure a secure connection. It is important to consult the manufacturer's instructions and local building codes before installing any type of plastic pipe.

How tight should plastic pipe fittings be?

How tight should plastic pipe fittings be?Plastic pipe fittings should be tightened until they are snug, but not over-tightened. Over-tightening can cause the fitting to crack or break, leading to leaks. It is important to follow the manufacturer's instructions and use the appropriate tools to ensure a proper and secure fit.

Despatch Image